Waterproof Rifle Covers: Why We Built a Seamless Rain Cover (and a Suppressor Hot Pocket)

The cover that wetted through

We didn't set out to make a rifle cover. We were using one, and on a wet day it wetted through. Moisture got inside, onto the scope and into the action, which is exactly where a cover is supposed to keep it out. So we built the one we wanted: fully waterproof, with nowhere for water to get in.

Why most rifle covers leak: the top seam

Most rifle rain covers are sewn with a seam running across the top. That's the side that faces the sky, so rain sits on the stitching and slowly works its way through. Seam tape helps for a while, but stitching is still a weak point.

Our covers have no seams across the top. The body is X-Pac, a laminated fabric that's 100% waterproof, and the construction keeps water off the parts that matter.

How it goes on

  • Slides over the front ~8 inches of the barrel, so the muzzle stays covered and protected.
  • Velcros in three spots along the bottom, so it's quick on and quick off between stages or when a shot opportunity comes up.
  • Rear tension strap lets you snug it down so it stays put in heavy wind.

What a rifle cover actually protects against

Rain. Water in the barrel, on the glass, and in the action. Keep the muzzle and scope dry between strings and while you're waiting out weather.

Wind and blowing grit. Out west, sand and dirt get blown into everything. A clean action and bolt raceway matter more than most people think, and grit in there causes friction and wear.

Sun and heat. A black scope sitting in direct sun gets hot. Big temperature swings are hard on optics, so shading the scope between stages or on a long sit is cheap insurance.

Two versions: Hot Pocket or standard

Rifle Cover with Hot Pocket

Built for suppressed bolt guns. The front 9 inches is a heat-resistant hot pocket, so you can cover the rifle right after shooting without worrying about a warm can melting the fabric. It keeps rain out of the muzzle and dirt out of the action.

Honest note: this is for bolt-action shooting, not rapid fire.

Colors: Coyote, Ranger Green.

Rifle Cover (Standard)

For rifles without a suppressor, and it's our more affordable option. It has the same seamless-top X-Pac build, the same three-point Velcro, and the same tension strap.

Colors: Coyote, Ocean Blue, Cayenne Orange.

Which one should you get?

  • Run a suppressor? Get the Hot Pocket.
  • Unsuppressed, or want the lower price? Get the Standard.

See both in our Shooting Gear collection.

Built for match shooters and hunters

PRS and NRL: keep your rifle dry and clean between stages, when the rain blows sideways, or when the bay is dusty.

Hunters: protect the rifle on wet stalks, windy glassing sessions, and in dusty country, then get it off fast when it counts.

Backed for life

Every cover carries the Sharps Mountain lifetime warranty, and we repair wear and damage. Covers are made to order in Bedford, Virginia, and ship in 2–4 business days.

FAQ

Is the cover fully waterproof? Yes. It's X-Pac with no seams across the top.

Can I put the Hot Pocket version on right after shooting? Yes, on a suppressed bolt gun. It isn't designed for rapid fire.

Does it stay on in wind? Yes. The rear tension strap snugs it down.

How fast does it ship? It's made to order and ships in 2–4 business days.

Shop the Rifle Covers →